USER MAINTENANCE INSTRUCTION
Cleaning the DishDrawerTM
The secondary panel and the front of the DishDrawer may need wiping down from time to time. This can be done with a clean damp cloth.
We do not recommend the use of the following cleaning agents on or in your DishDrawer as they may damage it:
·Plastic or stainless steel scouring pads.
·Abrasive, solvent, household cleaners, acid or alkaline cleaners.
·Handwashing liquids, soap, laundry detergents or disinfectants.
If a dishwasher cleaner is used, we would strongly recommend a Heavy Plus wash program with detergent by run immediately afterward to prevent damaged to the DishDrawer.
Cleaning the Drain Filter, Spray Arm, |
|
Filter Plate and Motor Assembly | 1 |
We recommend the drain filter be cleaned whenever | |
there is evidence of food particles. | 2 |
The filter plate is designed to be self cleaning, but | 3 |
|
food scraps may accumulate.
The spray arm and filter plate may need cleaning about once a month in normal use or more often, should the need arise.
To Clean the Drain Filter
•Lift up the drain filter access panel, if fitted on the basket.
•Lift and remove the drain filter out of the DishDrawer.
•Empty, rinse under clean running water and replace back into the allocated space. The correct placement of the drain filter is shown in
Figure 21.
To Clean the Spray Arm
·Remove the basket carefully. Lift from the back end first so that you do not knock the detergent and rinse agent dispenser.
·Lift the spray arm.
·Shake any foreign material out of the spray arm.
·Rinse the spray arm under water and wipe the spray arm with a damp cloth.
·Replace the spray arm back onto the impeller. Figure 21 shows the correct placement of the spray arm.
Figure 21 - Internal Parts
of the DishDrawer
Key
1.Spray Arm
2.Filter Plate
3.Drain Filter
25
