Installation instructions
Fitting the adjustable feet
13
Important!
Using the supplied adjustable feet is MANDATORY. For safety reasons and to ensure adequate ventilation, the cooker chassis MUST NOT sit directly on the floor, a plinth, or other support surface.
The adjustable feet must be fitted to the base of the cooker before use.
Rest the rear of the cooker on a piece of the polystyrene packaging exposing the base for the fitting of the feet.
Fit the four legs by screwing them tight into the support base as shown.
Figure 3 Location of feet | Figure 4 Top of feet screwed in tightly |
Levelling the cooker
Level the cooker by screwing the bottom of the feet in or out, as shown.
