Installation instructions

19

Adjusting The Minimum Burner Setting

Check whether the flame spreads to all burner ports when the burner is lit with the gas tap set to the minimum position. If some ports do not light, increase the minimum gas rate setting.

Check whether the burner remains lit even when the gas tap is turned quickly from the maximum to the minimum position. If the burner does not remain lit, increase the minimum gas rate setting.

To adjust the minimum gas rate setting: Turn on the burner

Turn the tap to the MINIMUM position Take off the knob

With a small flat screwdriver turn the screw to the correct regulation.

Note: for G30/G31 gas, completely tighten the screw.

regulation screw

Fig. 15 Adjusting the minimum burner setting

Page 21
Image 21
Fisher & Paykel OR90L installation instructions Adjusting The Minimum Burner Setting, Adjusting the minimum burner setting