Fisher & Paykel OR90L installation instructions This film before using the cooker

Models: OR90L

1 56
Download 56 pages 44.12 Kb
Page 5
Image 5

Safety and warnings

3

Some appliances have a protective film. Remove

this film before using the cooker.

After unpacking the appliance, check to to ensure it is not damaged and the door closes correctly. If in doubt, do not use it and consult your Authorised Dealer or a professionally qualified technician.

Electrical

This cooker is to be installed and connected to the electricity supply only by an authorised person.

If the installation requires alterations to the domestic electrical system call a qualified electrician. He should also check that the electrical system is suitable for the electricity drawn by the cooker.

The appliance must be connected to the mains, checking that the voltage corresponds to the value given in the rating plate and that the electrical cable sections can withstand the load specified on the plate.

A suitable disconnection switch must be incorporated in the permanent wiring, mounted and positioned to comply with the local wiring rules and regulations. The switch must be of an approved type installed in the fixed wiring and provide a 3 mm air gap contact separation in all poles in accordance with the local wiring rules.

Page 5
Image 5
Fisher & Paykel OR90L installation instructions This film before using the cooker