Fisher & Paykel OR90SBDSIX First use, Fitting the Catalytic panels, Refitting the side racks

18

First use

Remove the side racks to fit the Catalytic panels (if not already fitted)

1Remove all shelves and trays.

2For easier access to the fixing screws, you may remove the oven door first. See ‘Removing and refitting the oven door’ in Care and Cleaning.

3Remove the side racks on both sides:

3a Using a small coin or a flat-head screwdriver, loosen and remove both fixing screws. 4a Gently remove the side rack.

Fig. 17 Removing the side racks

Fitting the Catalytic panels

5Fit the catalytic panel. When fitting the catalytic panel make sure that - the arrows are pointing upwards

-the panel with the hole in it is on the right oven wall.

Refitting the side racks

6To refit the side racks

- make sure that they are the right way up, as in the illustrations, and that you tighten the fixing screws.

7If not already fitted, fit the telescopic sliding shelf supports. See “Care and cleaning’ for instructions.