Fisher & Paykel OR90SBDSIX installation instructions Using the rotisserie, Rotisserie drive hole

Using the rotisserie

27

3Position the skewer on the supports.

Place the skewer on the supports, and check that the meat does not touch the grill tray. Twist the handle off. It must not be left in the oven.

4Place the rotisserie in the oven (check that the fat filter is in place first).

Slide the grill tray all the way to the back on shelf position 1.

Move the rotisserie drive hole cover aside (right-hand wall of the oven). Insert the skewer fully into the rotisserie drive hole. Ensure the left hand side of the skewer is properly located on the supports.

5Start the rotisserie

Select the Rotisserie function.

Set the temperature.

The rotisserie will start to rotate.

Important!

Always turn the function dial to O (off) before removing the rotisserie. Always ensure that poultry is cooked thoroughly.

During use, the rotisserie components become hot. If you leave the oven door open after using the rotisserie, parts of the control panel may also become hot. Use oven mitts and take extra care, especially when removing the rotisserie support rack from the hot oven.

Always clean the fat filter after every use. See ‘Care and cleaning’.

Fig. 21c Position the	Fig. 21d Rotisserie drive hole cover
skewer on the supports

Rotisserie drive hole

Fig. 21e Place the rotisserie in the oven