Fisher & Paykel OR90SDBGFPX 12Installation instructions, Moving the cooker, Fixing the backguard

Models: OR90SDBGFPX

1 64
Download 64 pages 37.55 Kb
Page 14
Image 14
12Installation instructions

12Installation instructions

Moving the cooker

Important!

To prevent damaging the adjustable feet or lower trim, ensure the cooker is always lifted by two people.

Do not lift the cooker by the door handles.

DO NOT DRAG the cooker. Lift the feet clear of the floor.

Take extra care not to damage the door sensor (top left of oven).

Fig. 9 Incorrectly lifting the cooker

Fixing the backguard

Before installing the cooker, assemble the backguard “C” .

The backguard “C” can be found packed at the rear of the cooker.

1Before assembling, remove any protective film/adhesive tape.

2Remove the two spacers “A” and the screw “B” from the rear of the cooktop.

3Assemble the backguard as shown and fix it by screwing the central screw “B” and the spacers “A”.

Fig. 8 Correctly lifting the cooker

Fig. 10 Incorrectly moving the cooker

C B

A

Fig. 11 Assembling the backguard

Page 14
Image 14
Fisher & Paykel OR90SDBGFPX installation instructions 12Installation instructions, Moving the cooker, Fixing the backguard