Fisher & Paykel OR90SDBGFPX Care and cleaning, Burner parts and pan supports

Care and cleaning

39

Burner parts and pan supports

You can remove and clean these parts with hot soapy water or non-abrasive detergents. Clean spills regularly before they become burnt on. Do not wash these parts in a dishwasher.

After cleaning, check that the burners and their flame spreaders are dry before replacing correctly.

It is very important to check that the burner flame spreader and the cap have been correctly positioned. Failure to do so can cause serious problems.

Note: to avoid damage to the electronic ignition, do not try to light a burner without all burner parts in place.

Replacing the semi-rapid burners

Carefully replace the burner parts as per the following Figs. Check that:

the ignitor is always clean to ensure trouble-free sparking.

the probe is always clean to ensure correct operation of the safety valves (some models only) Note: both the ignitor and probe must be very carefully cleaned using a toothbrush and methylated spirits (see Fig.26).

CapC

Flame

F

spreader

Probe SIgnitor

Fig. 30 Correct line-up of semi-rapid burner parts Fig. 31 Replacing the semi-rapid burner caps