Fisher & Paykel OR90SDBGFPX installation instructions Care and cleaning

Models: OR90SDBGFPX

1 64
Download 64 pages 37.55 Kb
Page 55
Image 55
5Check the door shuts completely and that the door lock (at top centre of door) is not obstructing the door.

Care and cleaning

53

Sensor Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background Door Lock

5Check the door shuts completely and that the door lock (at top centre of door) is not obstructing the door.

6Check the door sensor (top left) is correctly operating:

start a ‘Self Clean’ cycle (see ‘Using the Self clean function’) wait five minutes - the door lock indicator light should turn on. after five minutes turn the function dial to O (Off).

IMPORTANT!

Do not continue with the Self Clean cycle if the side racks or shelves are in the oven.

If the door lock indicator light does not turn on, or the display shows Fdor, refer to ‘Troubleshooting’.

Page 55
Image 55
Fisher & Paykel OR90SDBGFPX installation instructions Care and cleaning