Cleaning and caring for your refrigerator 33 EN
Humidity Control System
Important!Retainer
When cleaning the shelf above the vegetable bins, we recommend that you do not disassemble the Humidity Control System from the shelf.
Humidity Slides 
If cleaning is necessary, follow these instructions:
1Remove the shelf by slightly tilting up the front and lifting the rear of the shelf at the same time. Then pull the shelf straight out.
2Unclip the lid from the clips at the back of the shelf and gently lift out from under the side retainers (refer to Fig.25).
Fig.25 Removing lid from rear clips and side retainers
Important!
Do not to pull the lid out of the retainer on the front of the shelf.
3Hold the lid up vertically (refer to Fig.26) and clean the underside of the shelf and lid.
4Once you have finished cleaning the shelf and lid, position lid back in place by fitting the lid under the side retainers (refer to Fig.27).
5Fasten lid to rear clips. Ensure that the cover is fully secure at the front and the back of the shelf (refer to Fig.28).
6To install the shelf back into the refrigerator, tilt the front edge up and rest the shelf on the rear lugs on the side walls of the refrigerator. Then gently rest the shelf on the front lugs. Ensure shelf is secure before letting go of the shelf.
Fig.26 Hold the lid vertically for cleaning
Fig.27 Fit lid under side retainers
Fig.28 Fasten lid to rear clips and ensure lid is secure
