ASSEMBLY
Hood
15 | FRONT VIEW |
|
•Fit the long tabs on the hood into the slots in the front end of the vehicle.
•Pull the hood forward and lower.
Note: The hood is held down by magnets. Simply lift to open the hood. Do not use around items that are sensitive to or affected by magnetic fields.
Rear Deck
16 | BACK VIEW |
|
•Fit the tabs on the rear deck into the slots in the back end of the vehicle.
•Insert two #8 x 3/4" screws into the rear deck. Tighten the screws.
Short Seat Belts
Seat 
Long Seat Belt
17 |
•Insert the fastener end of a short seat belt strap through the slot near the outer edge of the seat. Make sure the side of the seat belt with the fastener faces the outer edge of the seat.
•Pull the short seat belt strap completely through the slot until the last
•Repeat this procedure to assemble the other short seat belt strap.
•Insert each fastener end of the long seat belt strap through each slot in the center of the seat. Make sure the fasteners face the outer edge of the seat.
•Pull each side of the long seat belt strap evenly through the slots. Make sure to pull each
Slots
18 | TOP VIEW |
|
Note: The seat is adjustable and has three positions. You can move the seat back as your child grows.
•Insert both tabs on the front edge of the seat into one of the sets of slots inside the vehicle.
•Choose the slots closest to the dash for shorter drivers and the slots furthest from the dash for taller drivers.
13
