ASSEMBLYE
19 | BACK VIEW |
|
•Insert three black #8 x 3/4" screws into the back of the seat and tighten.
Note: You will need to remove these three screws if you change the seat position later.
20 | BOTTOM VIEW |
|
•Turn the vehicle over.
•Insert two #8 x 3/4" screws through the vehicle and into the rear deck. Tighten the screws.
Steering
Column
21 |
•Wipe the steering column with a paper towel to remove any excess lubricant.
•Insert the straight end of the steering column down through the hole in the vehicle floor and out through the hole in the dash.
Steering Linkage
Steering Column
22
•Insert the curved end of the steering column though the hole in the steering linkage.
14 | |
|
|
