ASSEMBLY
Dash Assembly
Dash
Connectors
10 | Motor Harness Connector |
•Position the motor harness connector toward the front of the vehicle.
•Place the dash assembly upside down on top of the front end of the vehicle.
•Plug the dash connector from the vehicle into the dash connector on the dash assembly.
Hint: If the connectors do not fit together, do not force them. Simply turn one of them around and try again.
Posts
11 |
•Fit the dash assembly onto the posts near the front end of the vehicle.
12 |
• Insert four #8 x 3/4" screws into the dash assembly and tighten.
13 | BACK VIEW |
•Insert two black #8 x 3/4" screws into the dash assembly as shown and tighten.
11 | |
|
|
