Fisher VCC-WB2000 Connecting to a LAN, Note:, English, Connecting to the Internet, Connecting to a Wireless LAN, If connecting to a router, use a

Connections

Connecting to a LAN

Use an Ethernet cable to connect the ETHERNET connector of the camera to the LAN’s Ethernet switching hub.

☞Use a straight-type Ethernet cable.

		PC CARD
MONITOR	ETHERNET	RS-232C
OUT		LAN

	AC24V	GND
PC
POWER 1 2
MODEM	DC12V
ALARM IN OUT		CLASS 2 WIRING

Ethernet cable (straight type)

Ethernet switching hub

Connecting to the Internet

Use an Ethernet cable to connect the ETHERNET connector of the camera to a device such as a router or ADSL modem that is connected to the Internet.

☞If connecting to a router, use a straight-type Ethernet cable. If connecting to an ADSL modem or to some other type of device, refer to the documentation provided with the device for details on what type of connection method should be used.

		PC CARD
MONITOR	ETHERNET	RS-232C
OUT
		Internet

	AC24V	GND
PC
POWER 1 2
MODEM	DC12V
ALARM IN OUT		CLASS 2 WIRING

Ethernet cable (straight type)

Router or ADSL modem

Connecting to a Wireless LAN

This camera can be connected to wired LANs using an Ethernet cable, and it can be connected to wireless LANS.

☞To connect the camera to a wireless LAN, insert a wireless LAN card into the PC CARD slot of the camera. You should use only the recommended wireless LAN cards and access points.

When a wireless LAN card has been inserted into the camera, the wireless LAN basically has priority, but if you change the network address to a different setting, you can also use the camera with a wired LAN at the same time, so that if a connection cannot be made to the wireless LAN, you can check the settings using the wired LAN instead.

(A) Inserting the wireless LAN card

Insert the wireless LAN card while checking that the direction is correct, and then press the eject button to lock it in.

(B) Removing the wireless LAN cardPress the eject button to eject the wireless LAN card.

(A)

Access point

			PC CARD
MONITOR	ETHERNET		RS-232C
OUT
	COM	AC24V	GND	LAN
PC
POWER 1 2
MODEM		DC12V
ALARM IN OUT			CLASS 2 WIRING

(B)

Note:

•Consult the place of purchase for the camera for details on obtaining a recommended wireless LAN card.

•The ambient temperatures should be less than 40° when the camera is being used with the wireless LAN card inserted.

– 10 – English