Alarm Setting

ID3

The camera is equipped with two types of alarm function: an external alarm sensor and a motion sensor. When an outside intruder is detected, these alarm functions can be used to record the images immediately before the alarm occurred (pre-alarm recording) and the alarm images themselves (post-alarm recording) into the camera’s internal memory or onto a memory card.

When an alarm is received, the ALARM indicator illuminates red on the live image screen, so that you can check if an alarm is being received or not.

External Alarm Sensor Settings

1

2

3

4

5

6

7

8

9 F

1 Make the following connections.

When using this unit, the supplied clamping core A must be installed on the power cord, in order to prevent electromagnetic interference to the other devices connected.

1Connect an infrared sensor or similar to the ALARM IN terminal at the rear of the camera.

2Connect a buzzer or lamp to the ALARM OUT terminal.

 

 

 

PC CARD

MONITOR

 

 

OUT

ETHERNET

 

RS-232C

 

COM AC24V

GND

PC

 

 

 

POWER1

2

 

A

MODEM

DC12V

ALARM IN OUT

CLASS 2 WIRING

2 Click the [ALARM] button in the main menu.

The ALARM SET screen will be displayed.

3 Change the EXTERNAL ALARM setting to“ NC” or “ NO” .

You can then select the items that are required for setting external alarms.

Note: Set MOTION DETECTOR to “OFF”.

Buzzer or lamp

Infrared sensor or similar

English

– 35 –