Network Camera Settings
1AUTHENTICATION
This sets the verification protocol to be use when connecting to the access point. Set this to the protocol specified by the Internet Service Provider. It should normally be set to “AUTO”.
Available settings:
•ΑΥΤΟ: PAP or CHAP is chosen automatically as required•ΠΑΠ: Only PAP verification is used.•ΧΗΑΠ: Only CHAP verification is used.2CIRCUIT TYPEThis sets the type of telephone circuit that the modem is connecting to.Available settings:
•ΤΟΝΕ: For tone dialing circuits•ΠΥΛΣΕ: For pulse dialing circuitsNote: Set to “TONE” if using a terminal adapter.3BAUD RATEThis sets the communication speed for the modem.Available settings: 115200, 38400 (bps)4DATA SIZEAvailable 8,settings:7 (bits)5PARITYThis sets the parity.Available settings:
•ΝΟΝΕ: No parity•ΕςΕΝ: Even parity•ΟΔΔ: Odd parity6STOP BITAvailable 1,settings:1.5, 27AUTO IP ADDRESS displayThis shows the IP address for the camera.Note: This is only displayed while the camera is connected.8ERROR INFO. displayThis shows error information relating to the previous PPP connection.Display details:•Modem timeout or Not connected•Line connection error•Line disconnected•PPP connection error•PPP verification error•PPP connected and disconnected normally
English | – 23 – |