Network Camera Settings

C PPP SET Settings

These settings are used in order to connect the camera to the Internet via a modem.

Note: When using modem connections, you cannot access the camera using a computer’s web

browser. You should normally connect the camera to a wired LAN or wireless LAN.

Must be entered

1

2

Must be entered

3

4

5

6

87

1 Install the Network Archiving software (sold separately) to the computer.

Refer to the documentation provided with the Network Archiving software for further details.

2 Set pin 1 of the PC/MODEM select switch
at the rear of the camera to the

“ MODEM”

setting.

 

3 Click the [PPP] button in the main menu.The initial PPP SET window will be displayed.4 Select “ USE” from the [PPP USE] drop-down list box.

5 Type in the telephone number, login ID and password for the access point to connect to.

•PROVIDER TEL. NO.•LOGIN ID•PASSWORD6 Type in the commands to use for controlling the modem.

Type in the commands starting with “AT” that are specified by the modem manufacturer in the [MODEM INITIALIZE COMMAND] box, and also type in the command to change the flow control setting to software flow control in the same box.

Change any other settings as required using the drop-down list boxes.

7 Once you have finished changing the settings, click the [SET] button.

– 22 –

English