• ΜΑΝΥΑΛ (∝ανυαλ ωηιτε βαλανχε):

CAMERA Settings

5BRIGHTThis lets you set the image brightness to one of five settings.Setting range: 1 to 5 (Default: 3)Note: The larger the setting, the brighter are the images.6ELECTRONIC SHUTTERThis setting is used when IRIS is set to “AI”.Setting range: 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000

☞✳❅▼▼❉■❇ ❍❁■◆❁● ◗❈❉▼❅ ❂❁●❁■❃❅

Click the and buttons repeatedly to adjust the settings for R (red) and B (blue).

Setting range: 0 to 255Note: The red or blue component becomes stronger when the setting is higher.
7BLC (backlight compensation)9AGC Gain

Available settings:

•ΟΦΦ: Backlight compensation is not carried out.•ΜΥΛΤΙ (∝υλτιπλε ποιντ πηοτο∝ετρψ):

Backlight compensation is calculated from the whole image to obtain correct images.

•ΧΕΝΤΕΡ (χεντερ φοχυσ πηοτο∝ετρψ):

Backlight compensation is calculated based on the center of the image to obtain correct images.

8WHITE BALANCE

Available settings:

•ΑΥΤΟ (αυτο∝ατιχ ωηιτε βαλανχε): The white balance is adjusted automatically to obtain correct colors even if the light source changes.

•ΙΝΔΟΟΡ: This setting is for when the camera is being used indoors under fluorescent lighting.

•ΟΥΤΔΟΟΡ: This setting is for when the camera is being used outdoors under natural sunlight.

This lets

you make manual fine adjustments to the white balance. It can be used when the “AUTO” setting does not give correct color reproduction.

If the images are too dark, change the maximum [AGC Gain] value to make the images lighter.

The default setting is “0”.

Available settings:

OFF: AGC is not used.–6 dB, 0, +6 dB, +9dBFGAMMASelect a value that is suitable for the monitor being used.Setting range: 1, 0.8, 0.6, 0.45, 0.3G[PRESET] button

Click this button to return all settings to their factory defaults. The preset confirmation dialog box will be displayed. Click the [OK] button to return the values to their factory defaults.

English

– 33 –