Attaching the Lens

Use a DC-type automatic iris-type lens (sold separately).
1 Remove the lens mount cap.

3 Connect the lens iris plug to the lens iris output connector of the camera.

Lenses from other manufacturers may have different plug shapes and specifications. In such cases, you may need to rewire the lens iris plug.

1 (–) control coil3 (+) drive coil
2 (+) control coil4 (–) drive coil
2 Attach the CS mount-type lens.Note:The “L” part of the lens should be 5 mm or less inlength. If a lens that does notconform to this standard isL used, it will not be possible toattach the lens correctly.Gently screw the lens into the camera.The following automatic iris-type lenses can be used.•VCL-CS8LY (standard, f = 8 mm)•VCL-CS4LY (wide angle, f = 4 mm)•VCL-CS2LY (extra wide angle, f = 2.8 mm)

2

1

2

1

 

 

43

4 3

(Connecting to the lens iris plug)

1Cut off the plug of the lens cable, cut off approximately 8 mm of the insulation, and then strip the ends of the cable sheaths leaving approximately 6 mm of sheath intact.

2Solder the ends of the cable wires to the ends of the pins, and then attach the cover of the lens iris plug.

3

2

For C mount type

In order to allow correct adjustment of the flange back, attach the C mount adapter ring (option) to the lens before attaching the lens to the camera.

English

– 7 –