Fitness Quest 284 Assembly Instructions, Tools Required included, Rear Foot Tube Installation

ASSEMBLY INSTRUCTIONS

Occasionally our products contain components that are pre-lubricated at the factory. We recommend that you protect flooring, or anything else the parts may contact, with newspaper or cloth.

IMPORTANT

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING.

Tools Required (included):

M5 Allen Wrench

Multi Hex Tool with Phillips Screwdriver

Wrench

STEP 1 – Rear Foot Tube Installation

Attach the two 3/8” x 70mm Carriage Bolts, 3/8” Curved Washers and 3/8” Acorn Nuts to the Rear Foot Tube.

Note: Make sure indentations face down on Rear Foot Tube.

NOTE: All location references, such as front, rear, left or right,

made in these instructions are from the user being

on the unit and facing forward.

3/8”

acorn

nut

3/8”

curved washer

rear

foot tube

3/8” x 70mm carriage bolt

crank

left pedal with strap

Figure 1 - Install Rear Foot Tube

	right pedal
	with strap
	STEP 2 – Foot Pedal Installation
	Thread Shafts of Pedals Right and Left into
shaft	Crank and tighten with wrench.
	Note: Pedals are marked Right and Left. Right
	Pedal threads clockwise, Left Pedal threads
	counter clockwise.

shaft

Figure 2 - Install Foot Pedals 5