CARE & STORAGE OF YOUR RECUMBENT BIKE
STEP 3 – Seat Carriage Assembly
Caring For Your Unit
Your Recumbent Bike has been carefully designed to require minimum maintenance. However, we recommend the following to keep your unit operating smoothly.
•Unplug the unit.
•Use your unit indoors only.
•Wipe all perspiration from your unit with a soft, clean cloth after each use to prevent an accumulation of sweat and dirt.
•Clean your unit on a regular basis to prevent a
the surface.
•Store your equipment in a dry area away from children and high traffic areas.
•Regularly check the tightness of nuts and bolts.
Storing Directions
Your bike is portable. If you need to change the location of your unit, please follow the steps below.
•Unplug the unit.
•Stand at the rear of the bike and grasp the rear handlebar.
•Lift up using your legs – not your back, tipping the machine forward until it is resting on the front transportation wheels/front rollers.
•Wheel the bike to its new location and carefully lower the unit back down to the floor.
a)Remove (1) Allen Bolt and (1) Washer from underside of Carriage Tube, see Figure 3.
b)Position Seat Carriage in front of Carriage Tube with the (1) bolt hole facing down.
c)Raise Locking Arm, slide Carriage Tube into Seat Carriage and push Locking Arm down to hold Carriage Tube in place.
d)Remove (3) Allen Bolts and (3) Washers from Main Frame.
e)Plug Pulse Wire from Main Frame into Long Extension Pulse Wire from Carriage Tube and remove twist tie, see Figure 3.
f)Slide Carriage Tube over Main Frame, align bolt holes and fasten using (3) Allen Bolts and (3) Washers removed in Step 3d, tighten bolts. Note: DO NOT Pinch Wires.
g)Attach Carriage Tube to Support Tube with (1) Allen Bolt and (1) Washer removed in Step 3a and tighten.
h)Tighten the Rear Foot Tube bolts, installed in Step 2c, with Multi Hex Tool provided.
M8 x 15mm
allen
bolts
seat
carriage
long extension
pulse wire
carriage
tube
M8 washers
pulse wire
main |
|
frame | locking arm |
support
tube
M8 washer
M8 x 15mm
allen bolt
Figure 3 - Install Seat Carriage
22 | 7 |
