Burner Flame
Adjustment
Continued
4.Slide burner forward off orifice and turn to one side to clear opening in hearth pan. Be careful not to bend or damage pilot or ignitor element.
5.To reinstall burner, follow reverse steps making sure air shutter on burner tube is completely seated over orifice mount.
6.Replace log set. Close door and latch. Reattach screen and louvers.
CAUTION: Make certain ori- fice is fully inside venturi tube's air shutter and that air shutter is adjusted accordingly, see Figure 54, page 26.
Glass Door
Hearth Pan
Grate and
Logs
Burner
Louver |
|
Assembly | Refractories |
| |
Figure 56 - Burner Removal |
Operating Guidlines
and Maintenance
Instructions
When lit for the first time, the appliance may emit a slight odor for about 16 - 24 hours. This is normal and is due to the “curing” of the logs and the
CAUTION: The appliance and logs can get very hot - Handle only when cool.
WARNING: Turn off gas and wall switch before servicing appliance. Any safety screen or guard removed for servicing the appliance must be replaced prior to operating the appliance.
WARNING: Make certain wires and gas lines are not touching the underside of the firebox.
WARNING: Children and adults should be alerted to the hazards of high surface tem- peratures, and to stay away from the appliance to avoid burns or clothing ignition. Young children should be carefully supervised when they are in the same room as the appliance.
WARNING: Have a qualified agency periodically inspect the vent system at the start of each heating season, for any obstruc- tion which may hinder its normal operation. Never obstruct the flow of combustion and venti- lation air. Keep the front of the appliance clear of all obstacles and materials.
Caution: Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and danger- ous operation.
www.desatech.com | 27 |