1594A/1595A Super-Thermometer
Authorized Service Centers
2
DO NOT connect an AC mains supply that does not match the voltage setting on the back of the unit.
DO NOT use this instrument in combination with any probe ( PRT or thermistor) to measure the
temperature or resistance of any device where the probe might come in contact with a conductor that is
electrically energized. Severe electric shock, personal injury, or death may occur.
DO NOT position this instrument in a manner where it is difficult to reach the power cord or power
entry module mains switch. When rack mounting the instrument, ensure the rack power cord and mains
supply switch are accessible.
1.2.2 CAUTIONS
If the instrument is dropped, struck, or handled in a way that causes internal or external physical
damage, immediately unplug the instrument, discontinue use, and contact a Fluke Authorized Service
Center for repair. Do not attempt to disassemble or repair the instrument. Refer repairs or replacement
of components to a Fluke Authorized Service Center.
DO NOT connect AC voltage to any input terminal on the instrument. Permanent damage to the
instrument will result.
1.3 Authorized Service Centers
Please contact one of the following authorized Service Centers to coordinate service on your Fluke product:
Fluke Corporation
799 E. Utah Valley Drive
American Fork, UT 84003-9775
USA
Phone: +1.801.763.1600
Telefax: +1.801.763.1010
E-mail: support@hartscientific.com
Fluke Nederland B.V.
Customer Support Services
Science Park Eindhoven 5108
5692 EC Son
NETHERLANDS
Phone: +31-402-675300
Telefax: +31-402-675321
E-mail: ServiceDesk@fluke.nl
Fluke Int’l Corporation
Service Center - Instrimpex
Room 2301 Sciteck Tower
22 Jianguomenwai Dajie
Chao Yang District
Beijing 100004, PRC
CHINA
Phone: +86-10-6-512-3436
Telefax: +86-10-6-512-3437
E-mail: xingye.han@fluke.com.cn