Fluke 1594A, 1595A 3 Preparation for Operation

Preparation for Operation

Line Voltage and Fuses

3 Preparation for Operation

The Super-Thermometer is shipped in a container designed to prevent damage during shipping. Inspect the

contents of the container for damage and immediately report any damage to the shipping company. Instruc-

tions for inspection are included in the shipping container.

Table 9 Optional Accessories

Item Model or part number

Rack Mount Kit 1594-RMKT

2590 Scanner 2590

Case 1594-CASE

Carry-handle Kit 1594-HNDL

Extended range test report 1994 (1594A), 1995 (1595A)

The Super-Thermometer instruction manual set is shipped on DVD. The set includes:

 1594A/1595A Super-Thermometer User’s Guide

 1594A/1595A Super-Thermometer Technical Guide

The 1594A/1595A Super-Thermometer User’s Guide contains instructions for unpacking and setting up the

instrument. Specications and an overview of Super-Thermometer operation are also included. The User’s

Guide is available in the following languages: English, Chinese, Spanish, Japanese, German, French, and

Russian.

The 1594A/1595A Super-Thermometer Technical Guide contains complete information for setting up and

operating the Super-Thermometer. It also includes instructions for remote operation, calibration and mainte-

nance. The Technical Guide is available in English only.

For ordering a replacement instruction manual DVD contact your local Fluke representative or service center.

All manuals are available online for download in PDF format.

CAUTION: To prevent possible damage to the instrument, verify the correct fuse is installed for the

selected line voltage setting.

The correct line power fuse and line voltage range was installed at the factory per the conguration that was

ordered. However, it is important to verify the correct fuse value and line voltage setting. The fuse is accessi-

ble on the rear panel in the PEM (Power Entry Module). The line voltage setting is shown in the PEM window

(see Figure 1 on page 16) and see Section 2.2, Specications, on page 5 for the fuse rating.

To check or replace the fuse and to verify or change the line voltage setting, refer to Figure 1 on page 16

and proceed as follows: