Technical Specifications
FS-4 HD and F S-4Pro HD Po rtable DTE R ecorders 101
Log Files
With each recording of a particular clip on a disk, the FS-4 HD
creates a text log file to identify information about the recorded
clip and the recording session. Information includes:
•Clip name
• Clip in/out source TC values
•Clip duration
• Clip type (record file type).
The log file also identifies when the shock cache becomes low
and when disk or other errors occur during a recording.
Error Messages
Error messages may appear on the FS-4 HD LCD display from
time to time. The purpose of these messages is to alert you to
action that may effect your FS-4 HD operation. Below is a list of
error messages and actions you can take:
Error Message Description Action
LOW BATTERY! Battery power is low. Connect AC Power or replace the
battery pack. When the unit is run
without the battery installed, this
warning can be displayed, that is
normal.
HIGH
TEMPERATURE! The unit is getting too hot
for normal operation. Make sure the vent and fan intake
holes are clear.
NO SPACE LEFT! The Disk Drive is Full. T ransfer files of f the drive and for mat it
before attempting to do more
recording.
DISK ERROR
XXX Lost Disk Communication. Contact Focus Enhancements
Technical Support.
NO DISK
DETECTED Lost Disk Communication. Contact Focus Enhancements
Technical Support.
WRONG
PRODUCT ID Incorrect Software Loaded. Download correct software and
perform upgrade again.
FILE NOT FOUND Wrong filename or missing
file. Check filename or that upgrade file
exists.
TRK LIMIT MAX! 999 clips exist on system. Copy content from FS-4 HD hard drive
and re-format.