Using the FS-4 HD with a Computer
34 FS -4 HD and FS-4 Pro H D Po rtab le D TE Re cor ders
Initial Setup
1. Connect the FS-4 HD through its COMPUTER I/O 1394 port to the
computer system using a standard 6-pin to 6-pin FireWire cable.
2. Enter HDD mode and enable DD Drive.
This s tep i s requ ired befor e mou ntin g the F S-4 H D to a c ompu ter.
• On the FS-4 HD go to the HDD screen.
•Select
DD Drive and Right arrow to Connect screen.
•Press
Enable function button.
Refer to the section, HDD Mode Screen on page 57
3. Connect power to the drive if necessary.
4. Consult the computer’s documentation for more information.
Mounting the FS-4 HD in Windows

Use this procedure for Windows XP, 2000, 98SE and ME.

1. On a Windows-based computer system, double click the My
Computer icon on the top left hand corner of the desktop. A
directory window appears.
2. Locate the FS-4 HD drive and open it.
Often, it appears as a standard FireWire disk drive and may be
labeled E:, F:, G:, and so on.
3. Open the FS-4 HD disk icon.