FS Functions
FS-4 HD an d FS -4Pr o HD Port abl e DTE Rec orde rs 55
• The size of the video clip depends on the length of the
loop.
• Loops of 60 minutes or less are recorded in one-minute
clips.
• Loops greater than 60 minutes, are recorded in 2GB clips.
• When the capacity of the disk is reached, one additional
clip is created. The size of the last clip depends on the
length of the loop i.e., one-minute or 2GB. The disk must
have at least 30 minutes of disk space available for this
functionality.
Saving Loop Record Clips
Press STOP during a record session.
The FS-4 HD stops recording and saves the current LOOP
RECORD session clips to a folder on the disk.
Snap Record FS-4Pro HD, DV modes only
Use SNAP to record individual frames. In Snap mode, pressing
Record captures a single frame. Each record SNAP session
captures the individual frames into a single file. To start a new
SNAP record session place the unit in STOP between SNAP
records.
• SNAP Record is available only in DV modes of
operation.
•Use SNAP in Local, Syncro Slave, and Tapeless control
modes.
• Removing power from the FS-4Pro HD in t he mids t of a
Snap recording session causes the FS-4Pro HD to
return to Normal recording mode when it powers back
up.
Another Method to Capture Single Frames
An alternative to Snap is EXT CTL FRAME. For more information see
EXT CTL OFF, Pause, Frame, File on page 66.