MR-HD100 with Other Devices
MR-HD100 Media Recorder
165
6. Put the MR-HD100 into Record mode and start recording.
The Settings page on the iPod now shows:
•MR-HD100 Status is recording,
•Current timecode,
•The number of the track being recorded,
7. Click on Clip Info.
The iPod displays the Clip info page with the template’s
metadata fields and/or their buttons. If Friendly Names
were assigned early, they appear.
This page is for logging clip-based - non TC Depend,
timecode dependent -- metadata.
8. Enter the metadata:
•For open data fields, click on the field: depending on
the data type, the iPod keyboard or number pad
appears.
•For metadata buttons, click on the button to display a
dropdown menu with its predefined values. Pick the
appropriate value.
9. Click Done. (Not shown in illustration.)
The data is fixed in the field and it is now possible to go
on to other metadata fields.
10. Repeat Steps 7, 8, and 9 until all metadata is specified.
11. Click one of the Update buttons.
The metadata is associated with the clip and immediately
uploaded and saved in the MR-HD100 database. This
metadata applies to the entire clip.
11
7
8