FOCUS Enhancements MR-HD100 Timecode-based Metadata (In and Out Markers)

MR-HD100 with Other Devices
MR-HD100 Media Recorder
166
Once logged, stop the recording.
It is also possible to log clip-based metadata to a clip after the
recording is complete, STOP mode, but before recording the next
clip.
It is also possible to log metadata when in Playback mode.
Timecode-based Metadata (In and Out Markers)
If while recording a clip an event occurs that the editor needs to
be aware of, for example a player is injured during a play, it is
possible to insert Markers to locate that portion of the clip.
To mark timecode specific values, it is important that a metadata
field have TC DEPEND enabled. This is done while the template
is being created.
When timecode In and Out markers are set during the recording
is at the discretion of the videographer and the events being
recorded.
1. Start recording.
2. Click on Marker.
The Marker page appears.
3. Click the Mark In: Set button.
This sets a In marker at that point in the timecode of the
recording.
5
2
3
4
7
9