FOCUS Enhancements MR-HD100 MR-HD100 to Wired (Ethernet) Network

MR-HD100 with Other Devices
MR-HD100 Media Recorder
144
MR-HD100 to Wired (Ethernet) Network
This procedure requires the use of a USB 2.0 to Ethernet Extender.
1. With the MR-HD100 powered off, use an USB 2.0 to
Ethernet Extender to connect the MR-HD100 to the network.
2. Power on the MR-HD100 and wait for the Home screen to
appear.
3. Go to the SETUP menu and locate IP ADDR.
If the network employs DCHP, the SETUP options IP ADDR,
IP MASK, BROADCAST, and GATEWAY display the network
assigned addresses.
4. Open an IE or Safari web browser.
5. Enter the MR-HD100’s IP ADDR into the browser’s IP
address bar and enter.
The MR-HD100 Templ ates web page opens.
MR-HD100 and FTP
To access the MR-HD100 via FTP, follow the same steps above.
In Step 5, enter the address ftp://FS:FS@ and then the IP ADDR
from SETUP.
For more information about FTP password, see FTP PASS on
page 115.