THE FOODSAVER USER MANUAL
13
7Press and release the On button.
The lights will turn on in sequence
as the Vac 1050 vacuums the bag.
8To stop the vacuum process before
all the air is removed, press and
release the Manual Seal Button.
The sound will stop and the lights
will turn off when bag is sealed.
The locks on the sides will release
automatically. Lift up the lid and
remove the bag.
9Vacuum packaging is complete.
NOTE: It takes approximately three seconds to stop the vacuum
process and seal the bag. If you are using a small bag or pack-
aging a fragile item, we recommend that you press down on the
Manual Seal Button immediately after pressing the On button.
How to Use the Manual Seal Button
THE FOODSAVER USER MANUAL
12
4Place the open end of the bag down into the vacuum channel.
5Close the lid.
6Lock the lid by pulling the locks forward on both sides until they
snap into place. (You may need to press down lightly on the stars
while pulling the locks forward.)
IMPORTANT: Make sure the open end of the bag touches the blue
label on the bottom of the vacuum channel.