Ford AM/FM stereo manual Replacing lost remote entry transmitters, Locks and Security

Locks and Security

Replacing lost remote entry transmitters

If you would like to have your remote entry transmitter reprogrammed because you lost one, or would like to buy additional remote entry transmitters, you can either reprogram them yourself, or take all remote entry transmitters to your authorized dealer for reprogramming.

How to reprogram your remote entry transmitters

You must have all remote entry transmitters (maximum of four) available before beginning this procedure.

To reprogram the remote entry transmitters:

1.Place the key in the ignition and turn from the (2) LOCK position to

(3) OFF.

2.Cycle eight times rapidly (within

10seconds) between the (3) OFF position and (4) ON. Note: The eighth turn must end in the (4) ON position.

4

3

5

2

1

3.The doors will lock, then unlock, to confirm that the programming mode has been activated.

4.Within 20 seconds press any button on the remote entry transmitter. Note: If more than 20 seconds have passed you will need to start the procedure over again.

5.The doors will lock, then unlock, to confirm that this remote entry transmitter has been programmed.

6.Repeat Steps 4 and 5 to program each additional remote entry transmitter (up to four transmitters).

7.Turn the ignition to the (3) OFF position after you have finished programming all of the remote entry transmitters.

8.The doors will lock, then unlock, to confirm that the programming mode has been exited.

73