Ford AM/FM stereo manual Seating and Safety Restraints, With assistance, remove the seat assembly

Seating and Safety Restraints

2.Pull the LH/RH seat latch handles, located under the seat, rearward to release the latch hook ends from the front strikers.

3.Move the seat rearward and lift the seats rear hooks away from the rear strikers prior to lifting the front hooks out from the front strikers.

4.With assistance, remove the seat assembly.

•To remove the 3rd, 4th, and 5th row seats (if equipped), repeat steps 2 through 4.

To install the seat:

1.Position the seat in the vehicle.

2.Align front hooks to front strikers, prior to lowering the rear hooks and aligning them with the rear strikers.

3.Engage the LH/RH latch rod hook ends in the front striker locking holes.

4.Rotate the LH/RH latch handles forward, and at the same time slide the seat assembly forward to engage the strikers. Continue forward movement until the seat reaches the end of its travel.

5.Make sure the safety belt is not twisted, then insert the seat belt tongue into detachable anchor until you hear a “click” and feel the latch engage (2nd row only).

Always latch the vehicle seat to the floor, whether the seat is occupied or empty. If not latched, the seat may cause injury

during a sudden stop.

80