|
|
|
Management | Device |
Note: Instead of restoring a previous configuration, you can also apply a configuration script. For more information, see “Scripts” on page 46.
Running scripts
!
1
2
3
Caution: Verify configuration scripts before deployment. Deploying a configuration script that alters host name, IP address, or the service settings can result in interrupted connectivity.
You can run scripts or schedule when a script runs from the Tasks section of the Device menu. Scripts allow you to deploy identical configuration items to many devices. Scripts are configured from configuration backup files which are then uploaded to the portal web site. For more information about scripts and configuring them, see “Scripts” on page 46.
To run a script
Go to Management > Device > Device Detail.
In the Tasks section, select Run Script.
Enter the appropriate information for the following:
Scheduled Time (GMT:<time_zone>)
Script
Select one of the following:
•Time – Enter the time period in the field or use the Calendar icon. The script will run at the specified time you enter.
•ASAP – Select to immediately run the script after you select Submit.
Select the name of the script you want to run from the list.
4Select Submit.
Viewing available firmware images
When you select the Show Applicable Firmware link in Tasks, all available firmware images on the FDN appear. This list includes FortiOS 2.80 firmware and patch releases.
Figure 22: Firmware images (including FortiOS 2.80)
FortiGuard Analysis and Management Service Version 1.2.0 Administration Guide |
|
43 |