Fortinet 1.2.0 manual Configuring widgets, To date, Color Bar chart only OK, 13-12000-406-20081031

Configuring widgets Dashboard

	To date	The end date and time of the time range. Appears
		only when Specify is selected in Report period.
		Select the calendar to configure the end date and
		time. Select OK after configuring both the date
		and time.
Top	Enter the top number of entries to be displayed. For example, select
	10 from the list so that only the top 10 events display.

Color (Bar chart only)

OK

Select the color of the bars on the bar chart. This is available only when bar chart is selected. You can select a color from either the list or the color block.

When you select the color block, the Color Palette appears; select a color and then select OK to apply it to the variable.

Select to save the settings (current session only).

Note: You must select Customize > Save Settings from the Dashboard if you want your settings to be saved permanently.

•

Figure 16: Traffic Report pie chart displaying the top traffic level by protocol

Figure 17: Traffic Report pie chart displaying second-level information for 80/tcp

FortiGuard Analysis and Management Service Version 1.2.0 Administration Guide

32 13-12000-406-20081031