Configuring widgets | Dashboard |
Figure 12: Resource Monitor
Monitor Name | Enter the name of the resource monitor (for example, | |
| Resource_Monitor_Headquarters). | |
Device | Select the device that the information is gathered from. | |
Polling Interval | Select how often the server will poll the device to receive information, | |
| in intervals of 60 seconds, 2 minutes, or 5 minutes. | |
Monitor(s) | Select the monitors to include in this widget, with the following options | |
| to specify what each will contain: | |
| Variable | The name of the variable. |
| Color | The color that will appear for that variable. You can |
|
| select a color from either the list or the color block. |
|
| When you select the color block, the Color Palette |
|
| appears; select a color and then select OK to apply it to |
|
| the variable. |
| Alert profile | The alert profile to use for that variable. For more |
|
| information about alert profiles, see “Configuring an |
|
| alert profile” on page 55. |
| Threshold | Enter the threshold (maximum) number for the |
|
| variable. |
Charting Options | Select the check box if you want the line in the graph to fill in below | |
| the line. |
|
OK | Select to save the settings (current session only). | |
| Note: You must select Customize > Save Settings from the | |
| Dashboard if you want your settings to be saved permanently. | |
•
•
Configuring the Network Monitor
The Network Monitor provides information about what is happening on the network for which the device is currently configured.
To configure a Network Monitor widget, select Add Network Monitor in Add Widgets, follow the instructions in the table below, and select OK. If you want to edit an existing Network Monitor widget, select the Edit icon in the widget and then follow the instructions in the table below. Select OK to save the changed settings.
| FortiGuard Analysis and Management Service Version 1.2.0 Administration Guide |
28 |
