Fortinet 1.2.0 manual Adding and editing devices, To add a device 1 Go to Management Device

Management Device

Basic Information section

IP	The internal IP address of the device.
Time Zone	The time zone associated with that device.
Firmware	The current firmware image running on the device. The firmware
	image is displayed in the format:
	v<firmware_version>-<build_number>(<maintenance
	release_number>).
Automatically	The current action the device will take when a configuration is saved:
Upload Config	NO – the device will not automatically upload the configuration
	YES – the device will automatically upload the configuration.
	Select Change to change whether the device will automatically upload
	a saved configuration or not.

Tasks section

Upgrade Firmware

Upgrade the firmware on the device. For more information about upgrading a device’s firmware, see “Changing firmware from the device” on page 45 and “Changing firmware from the portal web site” on page 44.

Run Script	Run a script file. For more information about scripts, see “Creating
	scripts” on page 46 and “Running scripts” on page 43.
Show Available	Displays all available firmware for the devices. For more information,
Firmware	see “Viewing available firmware images” on page 44.
Scheduled Task	The name of the scheduled task.
Type	The type of task that will be performed. There are three types: Config
	(configuration upload), Script (running a script), and Firmware
	(upgrading a firmware image).
Scheduled Time	The date and time of when the schedule task will begin. The date and
	time are in the format, yyyy-mm-dd hh:mm:ss.
Status	The status of the scheduled task.
Action	The action you can take to delete or edit a schedule. The Delete and
	Edit icons appear after the schedule task starts.

Revision History section

The Revision History section provides a list of backed up configurations. You can also compare configurations to view what changed between revisions. For more information, see “Viewing configuration revisions” on page 39.

Adding and editing devices

You can add devices to the contract or edit the daily volume and quota for a device. Adding devices to a contract is available only if your contract allows it.

To add a device

1Go to Management > Device.

2In the Device section, select Add Device.

3Enter the appropriate information for the following:

SN	Enter the serial number of the device.
Quota (G)	Enter the total amount of disk space that the device is allowed to
	use.
Daily Volume (M)	Enter the amount of disk space that the device is allowed to
	consume per day.
Comments	Enter any comments or descriptions for that device, if applicable.

4Select Submit.

FortiGuard Analysis and Management Service Version 1.2.0 Administration Guide

13-12000-406-20081031 37