INSTALLER INSTRUCTIONS 
IMPORTANT: After adjusting for use with a gas that is different from the initial testing one, replace the label on appliance housing with the one that corresponds to the new gas type.
ENGLISH
12. Adjustment of the minimum
Instructions for urban and methane gas
1. Light the burner and bring it to the minimum position.
2. Remove the gas tap knob and turn the adjust- ment screw [Fig. 8] inside or on the side of the tap rod (depending on the model), until a regular minimum flame is obtained.
3. | Fig. 8: adjustment of the minimum | |
stability (when quickly rotating the hand from | ||
| ||
maximum to minimum position the flame must |
| |
not shut off). |
|
4. Repeat the operation on all gas taps.
Instructions for liquid gas (LPG)
Tighten the screw inside, or on the side of the tap (depending on the mode), rod clockwise completely.
13. Electrical connection of the cooker hob
IMPORTANT: Before completing the following operation, always make sure that the voltage and sizing of the power supply line correspond to the characteristics indicated on the place located under the housing of the appliance. This plate must never be removed.
33
