USER INSTRUCTIONS

The upper cover (B) of the burners must be placed in opposite seat with the two intro- ductions notches in correspondence of the two cylinders below (C) and tighten clock- wise.

ENGLISH

The associated burner is indicated near each knob. The appliance is equipped with an electric ignition device. It is sufficient to press the knob and rotate it anti-clockwise to the maximum flame symbol, until it is lit. If it does not ignite within the first 15 sec- onds, bring the knob on [chiuso] (closed) and do not try to re-ignite for 60 seconds.

OFF

MAX

MIN

Fig. 11: standard burner knob

Once it is lit, keep the knob pressed for a few sec- onds in order for thermocouple to heat up. It is possible that the burner shuts off when the knob is released: this means that the thermocouple was not sufficiently heated. Wait a few seconds and re- peat the operation, keeping the knob pressed for a little longer. Once the burner is lit, it is possible to

CHIUSO

MAX 1

MAX 2

1 INSIDE BURNER

2 EXTERNAL CROWNS

MIN 1

CHIUSO 2

adjust the flame based on need.

After every use of the hob, always verify that the control knobs are in [chiuso] (closed) posi- tion.

If the burners were to shut off accidentally, after about 20 seconds a safety device intervenes and blocks gas output, even when the tap is open. In this case bring the knob to [chiuso] (closed) position and do not try to light the burner for at least 60 seconds.

MAX 1

 

MAX 1

MIN 2

 

CHIUSO 2

Fig. 12: burner knob dual (S4000)/dual gear

CHIUSO 1 INSIDE BURNER

2 EXTERNAL CROWNS

1MAX

2CHIUSO

1 MIN

1 MIN

2 MIN

2 CHIUSO

 

1 MAX

2 MAX

Fig. 13: burner knob

dual (GIOTTO/VULCANO)

35

Page 17
Image 17
Foster 9606801 user manual Standard burner knob