Foster 9606801 user manual Cooker hob use, Lighting the burners

ENGLISH

USER INSTRUCTIONS

It is mandatory to have an earth connection as per modes foreseen in the electrical system safety standards.

•If using a fixed connection, it is necessary to pre-set an omnipolar interruption device on the appliance power supply line with a contacts distance that is equal to or greater than 3 mm, located in a position that can be reached easily and is in proximity of the appliance.

•If using a connection with a plug and socket, verify that they are of the same type.

Avoid using reducers, adaptors or diverters because they may cause overheating or burns.

IMPORTANT: The manufacturer declines any liability for damages to persons or property, caused by the non observance of the following regulations or resulting from tampering with even a single part of the appliance.

14.Cooker hob use

14.1Lighting the burners

Before lighting hob burners, make sure that the flame spreading crowns are po- sitioned in their seat with the respective caps.

parallel and centred

tilted

Fig. 9: crown position

tilted

not centred

The new burners called "Series III" are assem- bled on certain cooker hobs. The lock system between cover (B) and flame spreading (A) guarantees perfect positioning and large cleaning ability.

Fig. 10: positioning of the series III burner

34