Foster 9606801 user manual Pressing it by hand Fig, Cooker hob distances

INSTALLER INSTRUCTIONS

•The distance of the cooker hob from the back edge must be at least 50 mm;

•The distance of the cooker hob from the walls that exceed worktop height must be at least 100 mm;

•Make sure that there is a minimum distance of 750 mm from the burner to any shelf placed vertically above it;

750

100

ENGLISH

Fig. 3: cooker hob distances

•Make sure that any exhaust appliances installed above the cooker hob are posi- tioned according to the measurements indicated in the hood instructions booklet.

•Carefully position the supplied in- sulating gasket along the external perimeter of the hole created on the worktop, trying to make it adhere along the entire surface by slightly

pressing it by hand [Fig. 4].

•Once these operations have been completed, use the supplied brack- ets to fasten the hob to the structure. Refer to the “Fastening the cook- er hob to the cabinet” paragraph

[Page 26]. Fig. 4: positioning the insulating gasket

6.2Installation on the support structure (worktop) of a flush built-in cooker hob (flush-mount edge)

This type of appliance requires milling on the 1.5 mm deep worktop, which measurements are indicated in the top drawing, identifiable in the section

Gas cooker hobs summary - models with "flush" built-in [Page 182]. The step is necessary to house the cooker hub edge so that it is "flush" with the worktop.

25