Mounting the hood body | Vr |
• Before attaching the hood body, tighten the two screws Vr lo- |
|
cated on the hood body mounting points. |
|
• Hook the hood body onto the screws 12a. |
|
• Fully tighten support screws 12a. |
|
• Adjust screws Vr to level the hood body. | 12a |
|
Connections
DUCTED VERSION AIR EXHAUST SYSTEM |
|
|
When installing the ducted version, connect the hood to the | ø 150 | ø 120 |
chimney using either a flexible or rigid pipe ø 150 or 120mm, the 10 |
| 9 |
choice of which is left to the installer. |
| 10 |
To install a ø 150
• To install the dumper 10
•Fix the pipe in position using sufficient pipe clamps (not sup- plied).
To install a ø 120
•To install a ø 120 mm air exhaust connection, insert the re- ducer flange 9 on the dumper 10.
•Fix the pipe in position using sufficient pipe clamps (not sup- plied).
•Remove any activated charcoal filters.
EN |
| 1 |
| 10 |
