Franke Consumer Products FCH 906 XS ECS manual Flue assembly, Recirculation Version Air Outlet

14.1

	RECIRCULATION VERSION AIR OUTLET
•	Put connection 15 into the connection support 7.3.
•	Insert the connection extension pieces laterally 14.1 in connec-	15
	tion 15.
•	Make sure that the outlet of the extension pieces 14.1 is hori-	ø 150
	zontally and vertically aligned with the chimney outlets.
•	Connect the air outlet connection 15 to the hood body outlet
	using either a flexible or rigid pipe ø 150 mm, the choice of
	which is left to the installer.

• Ensure that the activated charcoal filters have been inserted.

ELECTRICAL CONNECTION

•Connect the hood to the mains through a two-pole switch hav- ing a contact gap of at least 3 mm.

•Remove the grease filters (see paragraph Maintenance) being

sure that the connector of the feeding cable is correctly inserted in the socket placed on the side of the fan.

Flue assembly

Upper exhaust flue

•Slightly widen the two sides of the upper flue and hook them behind the brackets 7.2.1, making sure that they are well seated.

•Secure the sides to the brackets using the 4 screws 12c (2,9 x 9,5) supplied.

•Make sure that the outlet of the extensions pieces is aligned with the chimney outlets.

Lower exhaust flue

•Slightly widen the two sides of the flue and hook them be- tween the upper flue and the wall,

making sure that they are well seated.

•Fix the lower part laterally to the hood body using the 2 screws 12c (2,9 x 9,5) supplied.

2.1

2

2.2

7.2.1

12c

12c

12c

EN	1
	11