![Connections](/images/new-backgrounds/65436/6543631x1.webp)
Connections
DUCTING VERSION AIR EXHAUST SYSTEM
When installing the hood in ducting version, a rigid or a flexible pipe with the diameter corresponding to the flange diameter is used in order to connect the hood to the air outlet piping.
•Fix the pipe with an adequate quantity of pipe clamps (not supplied).
•Remove possible charcoal filters.
RECIRCULATION VERSION AIR OUTLET
•Cut a hole ø 125 mm in any shelf that may be posi- tioned over the hood.
•Insert the flange 10a on the hood body outlet.
•Connect the flange to the outlet on the shelf over the hood using a flexible or rigid pipe ø120 mm.
•Fix the pipe in position using sufficient pipe clamps (not supplied).
•Fix the directional grille 8 on the recirculation air outlet using the 2 screws 12e (2,9 x 12,7) provided.
•Ensure that the activated charcoal filters have been inserted.
12e
8
ELECTRICAL CONNECTION
•Connect the hood to the mains through a
EN |
| 1 |
| 16 |