Franklin 5870206300 installation manual Specifications, For Use With C

Specifications

	Voltage	190-260 VAC
	Frequency	50/60 Hz
Input from
	Current (max)	36 Amps (RMS)
Power Source
	Power Factor	1.0 (constant)
(single-phase)
	Power (idle)	65 Watts
	Power (max)	7200 Watts
	Voltage	Adjusts with Frequency
Output to Motor	Frequency Range	30-80 Hz (3 Hp pump)
(three-phase)		30-60 Hz (5 Hp pump)
	Current (max)	17.8 Amps (RMS, each phase)
Pressure Setting	Factory preset	50 psi
	Adjustment range	25-80 psi
	NEMA 4 (indoor/outdoor)	Model 5870206300
Operating (A)	Temperature (at 230 VAC	-13 to 125°F
	input)	(-25 to 51°C)
Conditions
	Relative Humidity	0-100%, non-condensing or
		condensing
Controller Size (B)	Outer dimensions	14¾” H × 15¾” W × 8¾” D
(approximate)	Weight	34 lbs (15.5kg)
	Pump (60Hz)	3.0 Hp (default)
For Use With (C)		5.0 Hp
	Motor (3-phase)	234317- series (5.0 Hp)

NOTES: (A) Operating temperature is specified at full output power when installed as described in Controller Location Selection on Page 11.

(B)Refer to Page 23 for detailed mounting dimensions.

(C)If a pump other than the default rating is used, refer to Page 8 for drive configuration.

22