Wiring

To Motor

Power Supply

 

From Circuit Breaker

Wiring

 

 

To Motor

Pressure Sensor

 

Wiring

 

Pressure Sensor

Wiring

Power Supply

From Circuit Breaker

CORRECTINCORRECT

4.For indoor or outdoor installations.

5.The SubDrive300 should only be mounted with the wiring end oriented downward. The controller should not be placed in direct sunlight or other locations subject to direct rain or snow.

6.The mounting location should have access to 230 VAC electrical supply and to the submersible motor wiring. To avoid possible interference with other appliances, please refer to the enclosed Installation Guide and observe all precautions regarding power cable routing.

7.To assure maximum weather protection, the unit must be mounted vertically with the cover properly aligned and secured with all eight lid screws.

12

Page 12
Image 12
Franklin 5870206300 installation manual Correctincorrect