Installing Book Cards

 

Selecting a Book

 

 

 

1.Turn your unit off.

2.Turn your unit over.

3.Align the tabs on the book card with the notches in the slot.

4.Press the book card down until it snaps into place.

Removing Book Cards

Warning: Never install or remove a book card while your unit is on. Any information that was entered in the built- in book or book card will be erased.

About Screen Illustrations

Some screen illustrations in this User’s Guide may differ slightly from what you see on screen. This does not mean that your unit is malfunctioning.

Once a book card is installed in the unit, you can select which book you want to use.

1.Turn your unit on.

2.Press card .

These are sample books.

3.Press or to highlight your selection.

For information on available Franklin

BOOKMAN products, select .

4.Press enter to select it.

Opening Your Unit

To open your unit, push the latch on the lid towards the back of the unit and lift up.

6

Page 7
Image 7
Franklin MWD-1440 manual Installing Book Cards Selecting a Book, Turn your unit off Turn your unit over