Figure 23. Install the Fresco i and the washers and cap nuts.
9Place the Fresco i onto the wall bracket and carefully slide the Fresco i into place (see figure 23).
10 Using a 6mm Allen tool, attach a washer and cap nut onto each pin. Do not fully tighten the cap nuts (see figure 23).
11 Make the signal connections from the amplifier (see ‘ Operation’, pages 4).
Figure 24. Rotate the Fresco i into position and tighten the cap nuts.
Figure 25. Rotate the Fresco i’s logo medallion so it is correctly orientated.
12 Rotate the Fresco i to point at the listening position and tighten the cap nuts (see figure 24).
13 Rotate the Fresco i’s logo medallion, by removing the grill cloth cover, gently pressing the medallion from behind and turning it to the correct orientation (see figure 25).