MOUNTING THE FRESCO I ON A WALL OR CEILING |
Figure 2. The parts of the Fresco i bracket assembly. |
NOTE: MartinLogan recommends using 5 wall anchors |
to secure each Fresco i to a wall. During the installation, |
if any of the screw/wall anchor positions are over a stud, |
it is recommended to screw directly into the stud. |
NOTE: To assure that your Fresco i is safely wall mounted, these instructions must be carefully followed. Study them thoroughly before installing your Fresco i's.
NOTE: The following instructions assume the mounting surface is standard wood frame and standard sheet rock construction. If you wish to mount the Fresco i to another type of material, you should consult a bonded contractor.
WARNING! Although installing the Fresco i on a wall requires 1 person, an assistant will be helpful.
The bracket assembly shipped with the Fresco i loudspeaker is designed for use only with the Fresco i. Use with other appliances may result in instability causing possible injury. To prevent injury, this apparatus must be securely attached to the wall in accordance with the installation instructions.
Which Way Should It Rotate?
Figure 3. Vertical Installation. Rotation direction for various installation
Figure 4. Horizontal Installation. Rotation direction for various installation
The bracket assembly supplied with the Fresco i allows the speaker to mount flat against a wall and pivot up to 90°. Depending on the installation locations, the Fresco i
