INSTALLATION IN BRIEF
We know you are eager to hear your new Fresco i loudspeaker, so this section is provided to allow fast and easy set up. Once you have it operational, please take the time to read, in depth, the rest of the information in this manual. It will give you perspective on how to attain the greatest possible performance from this most exacting transducer.
If you should experience any difficulties in the setup or operation of your Fresco i speaker, please refer to the Operation or Mounting sections of this manual.
Should you encounter a persistent problem that cannot be resolved, please contact your authorized MartinLogan dealer. They will provide you with the appropriate technical analysis to alleviate the situation.
WARNING!
•Refer servicing to a qualified technician.
•To prevent fire or shock hazard, do not expose this module to moisture.
•Turn amplifier off should any abnormal conditions occur.
•Do not drive speaker beyond its rated power.
The lightning bolt flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage" within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Step 1: Unpacking
Remove your new Fresco i speaker from the packing.
Step 2: Placement
Place the Fresco i near the desired location. Please see the ‘Mounting the Fresco i On a Wall or Ceiling’ section (page
Step 3: Signal Connection
Use the best speaker cables you can. High quality cables, available from your specialty dealer, are recommended and will give you superior performance. Spade connectors are suggested for optimum contact and ease of installation.
Attach your speaker cables to the signal input section on the rear panel. Be consistent when connecting speaker leads to the terminals on the back of the Fresco i. Take great care to assign the same color to the (+) terminal on both the speaker and the amplifier. Please see the ‘ Operation’ section (page 4) for more details.
Step 4: Listen and Enjoy
Now, you may turn on your system and enjoy!
Installation in Brief | 3 |
